The next step is to throw the abs away and use decent pla :-)
unefortunately this is not an option. but thanks for the answer
will try to lower the speed.
UPDATE: printing at 65mm/s doesnt do the trick apparently. i decided to let it do it's thing and maybe cover it up, we'll see. if not, i shall try 50 mm/s.
Last edited by Themoonisacheese; 06-04-2015 at 08:03 AM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion