Results 1 to 3 of 3
Thread: Slic3r for MakerFarm
-
01-31-2014, 12:02 AM #1
Slic3r for MakerFarm
I've had Colin trying to solve a coding problem for me.
It seems that later versions of Slic3r conflict with the i3, so he says to stay with version 0.9.9.
Old Man Emu
-
01-31-2014, 09:22 AM #2
What kind of conflicts? I've been running the latest Slic3r build with the i3 and it's pretty stable.
-
01-31-2014, 06:37 PM #3
There were a number of different problems, but the most annoying was the motors stopping after laying down part of the first layers of the raft, or mouse ears, depending on how I specified the start. You could see the position coordinated changing on theLCD screen, but nothing physical moved.
I'd like to have a good try at using the current version 1.0.0RC2, which may have fixed the problems I'm having. I think also that I was having some power supply problems which I think I've fixed. Just got to go test it today.
OME
Printing time- Is this right?
09-13-2024, 07:51 AM in General 3D Printing Discussion