Results 1 to 10 of 16
Threaded View
-
05-31-2015, 11:30 AM #2
try slowing down the first layer print speed. And I mean REALLY slow. I run mine at 10% of print speed and usually print at between 50 - 70mms.
That way you get an awful lot more adhesion to the print bed.
If that doesn't work - wipe the bed with a gluestick.
But be warned - slow first layer and glue stick can be almost impossible to remove :-)
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion