Results 1 to 10 of 22
Thread: Help recalibraring ABL
Hybrid View
-
05-28-2015, 07:10 PM #1
- Join Date
- Dec 2014
- Posts
- 43
So here is a weird thing when I put the numbers in the terminal I can print and everything is fine. Now when I put those numbers in the firmware and load it up it wants to push the nozzle about 4 mms into the glass. I have tried adjust the numbers and no matter what I use it wants to push the nozzle 4mm. I am stumped.
-
05-28-2015, 08:30 PM #2
- Join Date
- Nov 2014
- Posts
- 138
In pronterface do m502 and then m500 to store setting. After flashing the firmware.
-
05-28-2015, 11:18 PM #3
- Join Date
- Apr 2015
- Location
- Pacific Northwest
- Posts
- 24
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery