Results 1 to 10 of 22
Threaded View
-
05-22-2015, 08:12 PM #9
- Join Date
- Nov 2014
- Location
- Brevard, NC
- Posts
- 182
i3v_X-MotorMount_rev10_repaired.stlI found one small problem where the weld along the inside vertical was showing up underneath & I trimmed the arcs above & below the motor mount so they did not extend outside the cutout underneath. Here is the newer stl file & image to show what it looks like.X-MotorMountOnePiece_rev10.JPG
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion