Nothing was ever a secret, the second post that starts with "Makerware settings:" is the settings I used to print it. Anyways it was printed with glowfill, with 2 shells, with dynamic speed on. The speed when not extruding was 100, infill and insets was at 90, and outlines at 40, and bridges at 40. Print temp was 200 with the bed at 64. I was looking at the settings just now, and I was wondering if I could trick it into laying very thin many lines for bridges, instead of just a few thick lines. Maybe I could change the nozzle size setting under the bridges extruding profile or some other setting.