Results 1 to 7 of 7
Threaded View
-
05-16-2015, 02:55 PM #3
- Join Date
- Oct 2014
- Posts
- 8
Have you tried any other slicers?
The 2nd extruder on my i3v 10’’ is always off when I print with Simplify 3D, but works fine with Cura.Last edited by nexttoone45; 05-16-2015 at 03:11 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help