Results 1 to 5 of 5
Thread: PLA curling LATE in the print?
Threaded View
-
05-07-2015, 10:22 PM #5
- Join Date
- Jan 2015
- Posts
- 445
the more infill the more curling you will get. because there is more heat trapped in the plastic, and as it cools it will curl.
if you need 40%, which is a LOT thats fine, but id try 15-20% just to test to see if it still happens.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help