Close



Results 1 to 2 of 2
  1. #1
    Staff Engineer LambdaFF's Avatar
    Join Date
    Jan 2014
    Location
    France, Aix en Provence
    Posts
    1,137

    Design advice (engineering) for beginners

    A very good article from Philippe :
    http://www.spiderbot.eu/en/blog/desi...e-advises.html

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,801
    If you need accuracy on the holes, always design the holes with a slightly smaller diameter and plan to re-drill.
    Or just print them the size you want. If you know your printer, that's the best option. Redrilling always has the chance of chenging the bexact centre of the hole. So just make it the size you want in the first place.

    Also some of the things he says are obviously printer and slicer dependant. Most of the curves he says are bad, I could print with no problems.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •