Results 1 to 10 of 15
Threaded View
-
05-03-2015, 08:13 PM #5
- Join Date
- May 2015
- Posts
- 1
Thanks for posting that Configuration.h file! You should check your axis acceleration values though, I really don't think they should be in the thousands. Having modified those values myself I will eventually post my config file here. The only major issue I am having with it currently is the Y axis which is twitching for some reason. I suspect some value is set too high for it.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion