Results 1 to 6 of 6
Thread: G28 with a delayed G29 FAILURE?
Threaded View
-
04-29-2015, 05:04 PM #5
- Join Date
- Apr 2015
- Location
- Pacific Northwest
- Posts
- 24
Thanks all for the responses. Kablahz you nailed it with the DEFAULT_STEPPER_DEACTIVE_TIME statement. I checked my Configuration_Adv.H file and it was set to 60 seconds. Now that I understand the cause I can go on. BTW the firmware I am using is the DACB submission but I also checked that the original Makerfarm firmware was 60 seconds as well.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion