Results 1 to 6 of 6
Thread: G28 with a delayed G29 FAILURE?
Threaded View
-
04-29-2015, 04:27 PM #4
I don't have ABL, but the MakerFarm default for the z-axis value in configuration.h HOMING_FEEDRATE is only 50mm/minute. So, if you have a 12-inch (300mm) printer, a worst-case z-axis travel to home can take 300/50 or 6 minutes.
Printer will print perfect...
Today, 10:44 AM in Tips, Tricks and Tech Help