Results 1 to 5 of 5
Threaded View
-
04-26-2015, 12:28 PM #2
- Join Date
- Apr 2015
- Posts
- 7
One last very important thing.
Im currently producing some very high quality prints.. But a SERIOUS issue Arieses. 4.5 hours into a 6 hour print last night, my extruder stopped producing filiant. I cam in to check on it and noticed the extruder doing its thing about a mm over the print. Twice now it has stopped laying filament.
PLaese Help
I adjusted the tension screw and am working on my first print since then. but is doesnt seem to happen until layer 20 or so.
Thanks for any help,
Zan
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion