Results 1 to 10 of 10
Thread: Where did all of the images go?
Threaded View
-
04-17-2015, 04:51 PM #8
- Join Date
- Jul 2014
- Location
- Eastern Colorado
- Posts
- 536
For me, with the X endstop near RAMPS and Y endstop at the front, set as MIN endstops, every print came out facing the back of the printer. I could have just rotated the parts in the slicer to face forward, but I chose to move the switches and flip the motor plugs to achieve the same without having to think about it every time.
No changes were necessary to the firmware.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion