Results 1 to 5 of 5
-
01-24-2014, 11:09 AM #1
- Join Date
- Jan 2014
- Posts
- 1
Quick 3d printing survey: help me with my Master of science in less than 5 minutes
Hello everybody,
My name is Francesco Balocco, I’m a Master of Science student at Bocconi University in Milan.
My graduation paper is about 3D printing and the evolution of consumer behaviour that is taking place thanks to open source projects and to the availability of low cost production hardware.
I’ve prepared a quick survey (10 questions) to test some of my hypothesis, and, since I’m personally interested and I care about the topic, I decided to scale up my research and post it on tech forum not relying only on the usual social buzz.
I’ll be infinitely thankful to you who will decide to answer, and I’ll keep you updated on my results once the work will be done, if you’re interested.
Don’t hesitate to contact me in case of doubt or for any inquieries.
Thanks so much,
Francesco Balocco
Link to the survey:
https://www.surveymonkey.com/s/G5NJNB3
-
01-24-2014, 04:09 PM #2
- Join Date
- Jan 2014
- Location
- Los Angeles
- Posts
- 112
Just took it! Would be interested in seeing the final results
-
01-24-2014, 07:11 PM #3
-
01-24-2014, 07:45 PM #4
- Join Date
- Oct 2013
- Location
- new jersey
- Posts
- 752
all done! hope it helps
-
02-14-2014, 07:47 PM #5
- Join Date
- Feb 2014
- Location
- Providence
- Posts
- 15
done. make sure to ask a lot of people who aren't on this forum too. I think you're getting a pretty skewed idea who knows about 3d printing.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help