Close



Results 1 to 2 of 2
  1. #1

    Project peeling off of raft

    Hello,

    i am am new to 3d printing. I just purchased a makerbot 5th for my school and now learning to use it. So far so good, but some of our projects are peeling off the raft?

    Any suggestions?

    thanks!

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,801
    try using pla, blue tape and no raft.

    Hang on 5th gen ? no heated plate. So you are using pla.

    So basically blue tape, better calibration and no raft.
    Blue tape is blue painters tape: http://www.amazon.com/Scotch-1369894...+painters+tape
    I use duck brand but the 3m should be just as good.
    Pla sticks to it like hot toffee to skin :-)
    And if you've never burnt yourself making toffee - it's an experience to look forward too - not !

    I've never needed a raft with pla. And I'm basically using a makerbot 2nd gen copy :-)
    Mind you from what I've heard about the 5th gen - I wouldn't swap my cheapo flashforge clone for your spanky expensive machine either :-)
    But blue tape and no raft should fix the problem.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •