RGB Baloons

[rylangrayston]

Im haveing trouble posting images in this forum so here are links to the images that are soposed to show in my two posts above

this image should be showing in the first post:
https://drive.google.com/file/d/0B_7...ew?usp=sharing

This image should be showing in the second post where I wrote "as requested:"
https://drive.google.com/file/d/0B_7...ew?usp=sharing

[Feign]

why dont you print the baloons on the side? so you have not the height and a way lower printtime.

I would guess because the way he has them oriented, they don't need support, meaning they don't have to be processed afterwards. Print time isn't much of a concern compared to post-processing time.

[Synchron]

hm...
i think you have to put the whole object on small cylinders...like a "Stilt house" because you have a great problem with the actual print, to get it away from the "print-bed-grid".
Maybe like the structure here:
http://www.reppersdelight.spacymen.c...with-MeshMixer
so in all positions you will have to remove this support but with (maybe) doubled print time when you print it in this prosition...