Results 1 to 2 of 2
-
04-10-2015, 08:50 PM #1
- Join Date
- Jan 2015
- Posts
- 445
Startup Routine, printer wipe etc
Good evening... So ive got my ABL all set up and working, and very happy with it.
Next part is to find a good cooling system for PLA. last one i tried made the prints horrible on 3 sides, removing it fixed the issue, but i know i want cooling for overhangs etc.
Right now though I am looking for the Gcode for the printer wipe that runs a bead in front of the printer all the way across before printing, its priming thing.
i know its been posted, but searching isnt netting the right stuff.
thanks guys and gals.
-
04-10-2015, 09:34 PM #2
Clough42 has gcode for a prime and wipe on his itty bitty double extruder thread:
http://3dprintboard.com/showthread.p...code#post38044
I used this to start with but I didn't understand why one extruder wiped the length of the bed and the other one extruded onto the bed at z0 then wiped sideways for 15mm. so i changed it to prime both and wipe both along the side of the glass. Maybe C42 can explain what I'm missing about it.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help