Results 1 to 7 of 7
Threaded View
-
04-10-2015, 04:07 PM #3
- Join Date
- Jan 2014
- Posts
- 462
You'll also need to prevent z-axis movements. You can do this with a simple search-and-replace on the g-code file, although you might want to keep the z-axis movements for getting to the initial position of the extruder. You could also turn on z-lift and set it to a couple of mm, so that the writing implement lifts off the paper for non-extrusion moves.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help