Results 1 to 4 of 4
Thread: CubePro - issue with PrintJet.
Threaded View
-
04-08-2015, 04:21 AM #2
- Join Date
- Mar 2015
- Posts
- 5
if it still heats I would slowly heat it up and peel away any soft plastics..
If not heating up I would place it in the oven at 250 degrees and then peel it all away..
But I've never seen this before ..
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion