Results 1 to 3 of 3
Thread: Prusa iV3 making hairy prints
-
04-03-2015, 03:31 PM #1
- Join Date
- Mar 2015
- Location
- Fenton, MI
- Posts
- 63
Prusa iV3 making hairy prints
I printed a light switch plate a few days ago using kisslicer and it turned out great. Today, I tried to print a bracelet for my daughter using the same settings because I really am at the bottom of the learning curve here. A much more delicate item for sure. It's coming out hairier than my back. I'm waiting for my 3D Printing for Dummies book to arrive, so I'm turning to you folks. I'm printing with a 10" Prusa 9V3 with the following settings:
I'm sure you already see something that's not right. For further evidence, I present to you, one odd looking bracelet.
Can you folks tell me what needs to be tweaked, and better yet, why?
Thanks folks.
-
04-03-2015, 09:36 PM #2
- Join Date
- Oct 2014
- Posts
- 7
it looks like the temp is too high ,for pla i use 196 deg. for abs about 215-225 deg. ,,i was having he same problem
-
04-04-2015, 08:00 AM #3
- Join Date
- Mar 2015
- Location
- Fenton, MI
- Posts
- 63
Thanks hal. I'm going to print another copy of the same thing today, I'll do that.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion