Results 1 to 8 of 8
-
04-02-2015, 07:57 AM #1
- Join Date
- Apr 2015
- Posts
- 17
Which printer can use Nylon 2200 ?
I am new to 3d printing and was wondering which 3d printers can use Nylon 2200 and can somebody please point me in the right direction? I want it to be able to print heads of people for me ect, many thanks in advance.
-
04-02-2015, 09:30 AM #2
At what temperature does it print?
In which format does it come (pellets, 1.75mm filament, 3mm filament, etc.)?
-
04-02-2015, 09:52 AM #3
- Join Date
- Apr 2015
- Posts
- 17
You will have to forgive my newbness I have no idea, I was told that a printer which uses this could make a model of a head I want making and then I would have to paint it, I just need more information and am a bit stuck in this regard, any help would be welcome.
-
04-02-2015, 11:24 AM #4
- Join Date
- Aug 2014
- Location
- Montreal, Quebec
- Posts
- 576
Googled a few seconds ago, and so far I have seen only SLS printer based.
-
04-10-2015, 02:58 AM #5
- Join Date
- Apr 2015
- Posts
- 17
I am waiting on the Wanhao d5s and also I have a heated bed for it, could I use the nylon filament with this printer? although I think other materials would be just as good for head/busts
-
04-10-2015, 10:01 AM #6
SLS means the process type : selective laser sintering or something like it.
Typically this is a powder product used in laser printers (>5k$), it won't work with the filament printers ... including the Wanhao.
-
04-10-2015, 10:37 AM #7
yes you can use nylon filament in your wanhao. You probably won't want to. It's a real swine to get to work and expensive.
And if all you want to print is a head to paint - just use pla :-)
-
04-10-2015, 01:55 PM #8
- Join Date
- Apr 2015
- Posts
- 17
I will try the white filaments and see which one can be painted best to look realistic ect thanks for the reply guys the more information the better
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion