12" Alum Y Plate

[rhonal89]

Am interested. If is nice and thick. But not too heavy.
Add me to the list if not too much. Better be cheaper than that borosilicate glass. For a 12 size bed from MCMaster that glass cost me 75.

replace the wood

[pgx3s]

I would be interesed. Nur depending on price and delivery costs to Switzerland.

[Draled]

I'm interested in both, bottom and to replace to glass. Depending on price. I was thinking about doing this myself, buying it would be much easier.

[Chadd]

I would be, but I am not quite sure you need 1/4" thick plate.

The wood bed is IMO trash, constantly warps in one direction or another, at the least it should have some stiffening supports on it to keep it from warping so much.

[Kevinfig17787]

I'm interested all the way that wood bed is trash

[ddj523]

I would be interested

[adamfilip]

does anyone have a cad file of the existing Y wood bed?

[TechMasterJoe]

this is the one i made tonight for the 12" Y bed
anyone in US that wants one let me know i will be cutting them on the water jet at work on Thursday
6061 T6 come out to 38$
7075 T6 (much harder stuff) about 45$
Plus shipping i make Nothing pure cost to make

[pgx3s]

this is the one i made tonight for the 12" Y bed
anyone in US that wants one let me know i will be cutting them on the water jet at work on Thursday
6061 T6 come out to 38$
7075 T6 (much harder stuff) about 45$
Plus shipping i make Nothing pure cost to make

Looks good to me.
I am wondering about the weight in relation with the acceleration.

Do u know what shippment to Switzerland would cost me?

BR
PGX3S

[PyramidDave]

I see you have left the square holes for the wooden parts that hold the belt to the bed. Have you looked at changing this clamp to something like this design: http://www.thingiverse.com/thing:619347
It would only require 2 round holes drilled for it instead of the 4 square holes. Since this plastic part is for an i3 & not an i3v, the height of it might need to be adjusted some.