Results 1 to 4 of 4
Thread: FlashForge Dreamer Qs
Threaded View
-
03-27-2015, 11:15 AM #2
- Join Date
- Mar 2014
- Posts
- 35
If it's ABS filament from Flashforge, the ideal extruder temperature is ~220-240C. For filament sticking problems, there's several solutions:
1. Using glass plate
2. Using sticky surface from either Buildtak or Flashforge
3. Use kapton tape.
The sticky surface works best and is a pretty cost-effective solution. Glass plate works well but you may have to spray some hair spray for your prints to stick.
Hope this helps!Need immediate assistance? Please give us a call at toll-free 1.855.243.9838 / international: 1.626.322.3855 M-F 9:00am - 5:00pm PST | E-mail: supports@flashforge-usa.com | FlashForge YouTube Channel
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help