Results 1 to 2 of 2
Threaded View
-
03-25-2015, 08:29 AM #2
- Join Date
- Jan 2015
- Posts
- 445
if that bottom pic is your first layer, lower it.. thats not enough (in some cases) to get a good adhere to PEI.
if that bottom pic is your first layer, lower it.. thats not enough (in some cases) to get a good adhere to PEI.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help