Results 1 to 2 of 2
Thread: PLA Conditioning / oiling
Threaded View
-
03-19-2015, 04:11 PM #1
- Join Date
- Oct 2014
- Posts
- 41
PLA Conditioning / oiling
To help with my ongoing all metal hot end saga and jams - i removed my hotend and did some tests.
My filament is 2.95mm and fairly consistent, however what I have noticed is that it has become difficult to push trough the fin section, probably due to residue from the filament over time.
Does anyone here condition their PLA / add a small amount of oil - does this have significant benefits ?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion