Results 1 to 6 of 6
Thread: Z Axis thoughts
Threaded View
-
03-12-2015, 10:50 AM #5
- Join Date
- Mar 2015
- Location
- UK
- Posts
- 3
Thanks Rylan, for the additional information I will have a look at the code and see how to set this up. It looks like you have already thought of this as an approach.
I was going to use a smaller simpler PIC to help keep the cost down, something like a PICAXE which even has a BASIC language. An easydriver stepper controller requires two pins Direction and step and another to look for the serial signal.
I will look at the basic hardware and software and await a Printer.
Cheers
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion