Results 1 to 10 of 12
Thread: Artificial supports, not Gcode
Threaded View
-
03-09-2015, 05:01 PM #7
- Join Date
- Jan 2014
- Posts
- 462
I use sketchup and create supports the same width as the extrusion width setting I have in Slic3r, or slightly smaller. The supports are printed a single extrusion wide and tend to come away with no sanding required. If necessary I can scrape any residue away cleanly with a knife.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help