Subscribe to Our Newsletter Advertise
Close



Results 1 to 10 of 38

Hybrid View

  1. 03-08-2015, 08:05 AM #1
    clough42
    clough42 is offline
    Engineer clough42's Avatar
    Join Date
    May 2014
    Location
    Meridian, ID
    Posts
    418
    Quote Originally Posted by AbuMaia View Post
    Can one use the hardware kit for the IBDE on this extruder?
    It's a shorter belt (188mm vs 200mm). This extruder also uses m3x50 screws and compression springs and 608 bearings. I could put together a kit if there is interest. I have belts and pulleys.
    Reply With Quote Reply With Quote
  2. 03-09-2015, 07:15 AM #2
    PyramidDave
    PyramidDave is offline
    Technologist
    Join Date
    Nov 2014
    Location
    Brevard, NC
    Posts
    182
    Quote Originally Posted by clough42 View Post
    It's a shorter belt (188mm vs 200mm). This extruder also uses m3x50 screws and compression springs and 608 bearings. I could put together a kit if there is interest. I have belts and pulleys.
    I would be interested in one of these kits for the Itty Bitty Single as I am not ready to go with a dual extruder yet.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules