Close



Results 1 to 5 of 5
  1. #1
    3DPrintBoardPro Member car3less's Avatar
    Join Date
    Oct 2014
    Location
    Bucuresti
    Posts
    109
    Follow car3less On Twitter Add car3less on Facebook Add car3less on Shapeways

    Tool 0 failure! Temp limit reached.

    When I open my Flashforge Creator Pro, I receive this error :Tool 0 failure! Temp limit reached.
    Has anyone seen this before? What should I do?
    Printare 3D Bucuresti

    Any sufficiently advanced technology is indistinguishable from magic. Arthur C. Clarke

  2. #2
    Student
    Join Date
    Jan 2015
    Location
    Antwerp - Belgium
    Posts
    13
    probably a loose wire from your temperature sensor to your board, or your temperature sensor may be damaged.
    Tool 0 failure means it's not the heatbed but the actual hot-end temperature sensor that is failing !

  3. #3
    3DPrintBoardPro Member car3less's Avatar
    Join Date
    Oct 2014
    Location
    Bucuresti
    Posts
    109
    Follow car3less On Twitter Add car3less on Facebook Add car3less on Shapeways
    Quote Originally Posted by sn00zerman View Post
    probably a loose wire from your temperature sensor to your board, or your temperature sensor may be damaged.
    Tool 0 failure means it's not the heatbed but the actual hot-end temperature sensor that is failing !
    Yes, i discovered the wire to the main board was loose. Now it works again!!

    Thank you!
    Printare 3D Bucuresti

    Any sufficiently advanced technology is indistinguishable from magic. Arthur C. Clarke

  4. #4
    Senior Engineer
    Join Date
    Jun 2014
    Location
    Burnley, UK
    Posts
    1,662
    I have that message but I am such a lazy **** that it's been like that for months.

  5. #5
    3DPrintBoardPro Member car3less's Avatar
    Join Date
    Oct 2014
    Location
    Bucuresti
    Posts
    109
    Follow car3less On Twitter Add car3less on Facebook Add car3less on Shapeways
    I needed the printer so I had to solve it No need for extra "furniture" in the office..
    Printare 3D Bucuresti

    Any sufficiently advanced technology is indistinguishable from magic. Arthur C. Clarke

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •