Results 1 to 10 of 10
Threaded View
-
01-17-2014, 07:51 AM #2
- Join Date
- Oct 2013
- Location
- new jersey
- Posts
- 752
smallest i have seen is a .25. they can get a little tricky to print with. you wont find a .1 that i know of. the problem is that the plastic is thick and the force necessary to squeeze it through such a small hole become more than what a drive gear can put on the filament without stripping out.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion