Results 1 to 4 of 4
Threaded View
-
03-04-2015, 01:18 PM #1
- Join Date
- May 2014
- Location
- San Francisco, CA
- Posts
- 29
Kudo3D Introduces 2nd Generation PSP Container
We recently launched our second-generation passive self-peeling (PSP) resin container. Our testing of the container has yielded excellent results. We have completed 52 prints in a row! We are observing higher resolution and better surface smoothness. We only used about 200g of castable resin to complete all of these prints.
Printing speeds have increased as well! At 37 microns XY and 35 microns Z, we are printing around 40% faster at 1 inch per hour. Printing at lower resolutions such as 50 microns and 100 microns XY is faster as well, but the increase is not as high as 40%. All of the prints in the picture above took between 1 to 2 hours to print. The rings took only 1 hour!
Last edited by Roberta3D; 03-04-2015 at 07:38 PM.
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help