Results 1 to 6 of 6
-
03-03-2015, 10:44 AM #1
- Join Date
- Sep 2014
- Posts
- 14
Gantry assembly randomly fell out help.
Last night while my printer was NOT in use, the front right y axis gantry assembly fell out. I managed to reassemble it and put it back in place and the printer seems to be working, but I found a spacer that I couldn't figure out where it belongs. As far as I can tell, I reassembled the gantry just like the others. You can see in the pictures there's the wide spacer to the inside(left of the rod) and the thin one on the outside(right of the rod) . Here is a picture of the mystery spacer, It's thinner than the ones I saw on the other gantries and it's clean, which leads me to think it might be a spare part that got mixed in while I was putting the gantry back together. Any Idea where this spacer belongs, did I miss something or is it just a spare? Also, Has anyone else had a gantry randomly fall out, is this something I need to fix? I appreciate any insight you guys can provide. Thanks!
-
03-03-2015, 03:46 PM #2
- Join Date
- Mar 2015
- Location
- California
- Posts
- 28
Wow, never had that happen. I'll check my printer when I get home and see if I can see how mine is.
-
03-03-2015, 03:47 PM #3
- Join Date
- Mar 2015
- Location
- California
- Posts
- 28
Oh yeah.... Which model printer do you have?
-
03-03-2015, 04:05 PM #4
- Join Date
- Sep 2014
- Posts
- 14
Oh yeah, knowing the model would be helpful lol. I have the Flashforge creator x. Thanks
-
03-03-2015, 05:15 PM #5
- Join Date
- Mar 2015
- Location
- California
- Posts
- 28
I'll have a Creator X Pro but I'll look and see if I can find anything that would be of help when I get home tonight
-
03-03-2015, 09:50 PM #6
- Join Date
- Mar 2015
- Location
- California
- Posts
- 28
Here are a couple of pictures I took of my Creator X Pro. Hopefully you see something that can help you
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help