Can someone help me out with my prints

[brota]

I did cover the bed with tape yesterday.
My room is a little cool so I did 221C and 80 for the bed.
I was able to do a print that of what I showed in the top photo.
What I am seeing now is when I try without raft it doesn't stick at all it just balls up at the tip.
speeds is 40 and 50

I do appreciate everyones help!

Brian

[curious aardvark]

don't heat the bed.
Or if you do heat the bed - make sure you calibrate it with the bed HEATED. You can speficy this in the pre-heat settings on the printer control panel.
Otherwise you calibrate cold, heat the bed which changes shape and you're instantly out of calibration.
Geoff's about the only person who apparently made this work. But then he lives in australia - where many things are upside down :-) And it's bloody hot.