Results 1 to 10 of 16
Threaded View
-
02-20-2015, 10:29 AM #8
I would use some PFA, It is a combo of PTFE and FEP and is more transparent than PTFE, and cheaper. Tygon would have too much friction that will stress the motor.
I would use some PFA, It is a combo of PTFE and FEP and is more transparent than PTFE, and cheaper. Tygon would have too much friction that will stress the motor.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion