Results 1 to 5 of 5
Thread: A couple of questions
Threaded View
-
02-19-2015, 07:57 PM #4
- Join Date
- Dec 2014
- Posts
- 28
Supposedly leveling with everything heated up is the most accurate method, but I've never seen any better results from it . The extruder's springs should be compressed to 11mm when filament is loaded; use calipers or a ruler to measure the springs from idler to washer.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion