Results 1 to 3 of 3
-
02-19-2015, 09:43 AM #1
Need a working simplify3d right head profile for flashforge creator
If I load a right head profile. everything heats up okay and then goes bingly bingly beep and nothing else happens.
If I use a modified left head profile I can get the right head to print - but not to wait till it gets to temperature and then print.
I can prehet the right head and then print - but that's a pita. And It just won't do dual extrusion at all. Again doesn't wait for right head to heat.
Both heads work fine in makerware - but I have a 0.5mm nozzle on the right head which i can't tell makerware about.
well okay I can. Just find proftweak a bloody nuisance and prefer s3d for the finer adjustments.
So I'd really like to get righty working with the right head.
I'm pretty sure I've buggered the profiles up somehow. But no idea how to reset back to factory defaults.
Help please :-)Last edited by curious aardvark; 02-19-2015 at 09:52 AM.
-
02-19-2015, 10:13 AM #2
Just click on Help, and reset all settings. SHOULD do it...
-
02-19-2015, 10:54 AM #3
okay, looks okay.
Let you know if it works :-)
Nope. Just bingly bingly beep and then nothing.
Now given that the left head has always worked perfectly with s3d and righty works fine with makerware.
What is going on ?
I mean i can make righty print with a modified left profile. Just have to pre-heat as it doesn't wait for head to get to temp.Last edited by curious aardvark; 02-19-2015 at 11:08 AM.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion