Results 1 to 9 of 9
Threaded View
-
02-19-2015, 04:40 AM #6
- Join Date
- Feb 2015
- Posts
- 13
thx for answer 3dkarma.
usually when I printing something I try to set the object at an angle of 45 degrees, and I also thought that the beams would be difficult/ too thin, but in generally it managed to print it, depends on an angle and support walls. Still is a riddle - how to slice it
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help