Results 1 to 9 of 9
Threaded View
-
02-17-2015, 09:21 PM #2
The print volume of the Ultimaker 2 GO is not 633 cubic inches. The print dimensions i found (12 x 12 x 15.5 cm) work out to about 136 cubic inches. No idea where you got the 633 figure from.
The cube root of 633 is 8.586205. The build volume would have to be about 8.6 inches (21.84 cm) per axis.Last edited by truly_bent; 02-17-2015 at 09:35 PM.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion