Results 1 to 9 of 9
Thread: Battery Backup Power Supply
Threaded View
-
02-12-2015, 01:12 PM #3
Here's a quick back of the envelope calculation/what I would do in this apocalypse scenario (read: I don't recommend doing this in this way, there's no regulation to keep the battery at 12VDC, could be more could be less, could destroy your printer.):
A quick an very general google search says most car batteries have a capacity of 50Ah (Amp-Hours)
I think our printers need something like 11A for the bed and 2-5A for the hotend to lets say 15A @ 12VDC
Car batteries are 12VDC, so (50A-H)/15A = approx 3.33 hrs of run time from a car battery.
*grabs popcorn*Last edited by gmay3; 02-12-2015 at 01:19 PM.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion