Results 1 to 10 of 54
Thread: bq's Ciclop 3D Scanner
Threaded View
-
02-10-2015, 10:09 AM #11
- Join Date
- Feb 2015
- Posts
- 15
Ok so i have a pretty good list of all of the parts needed from Mouser as a project.
The only thing that i have not been able to get nailed down is the PTC
The MF-Rxx is the series but i am not sure of the values that are desired. As what should the hold, trip and max current be and Max Voltage.
Without the PTC's the cost of electronics is about $16 worth of components and the stepper drivers from pololu of about $17 and if you needed Ardunio Uni R3 about another $30
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help