Results 1 to 2 of 2
-
12-27-2014, 01:38 PM #1
Now You Can 3D Print an Automated Fish Feeder
During the holidays, Helios Labs needed to automate fish feeding for their aquaponics system, and fast. Turning to 3D design, 3D printing, and Arduino software, they created a small 3D printed device that could feed fish in an automated fashion for up to a month. With the Arduino software running a modified servo, the team set up the food to be dispersed from the 3D printed device at intervals twice daily. Check out more details in the full article: http://3dprint.com/33438/helios-labs-3d-printed-feeder/
Below is a photo of the 3D printed feeder installed in an aquarium:
-
02-08-2015, 02:50 PM #2
- Join Date
- Feb 2015
- Location
- Minnesota
- Posts
- 1
I have a PrintrBot Simple at school and would love to print something like this but I have no background in Arduinos. Would it be tough to set up that end of it?
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion