Results 1 to 1 of 1
-
02-06-2015, 01:20 PM #1
- Join Date
- Jan 2015
- Posts
- 306
Need pinchwheel smaller in diameter
I have a Type A series 1. Pinchwheel replacement I got has a diameter of 10.5 mm, original one was 7.5mm diameter. For a 5mm shaft.
After calibrating my steps/mm, the motor skips because the increase in pinchwheel diameter requires more torque from the motor. I need to find a good sharp pinchwheel that is smaller in diameter or somehow boost torque to the motor. Any suggestions?
I am using pronterface and KISSlicer
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion