Results 1 to 10 of 166
Thread: New 12" user and I am LOST!
Threaded View
-
02-05-2015, 10:06 AM #4
- Join Date
- Feb 2015
- Posts
- 371
Here are some pics...
Comparison of Afinia part on left and maker farm on Right. Both ABS and .4mm tip
Yuk! Blobs on side of print and the holes did not fit the printer even after I cleaned them out.
Nozzle height (end stop) set with paper. When it prints the nozzle is 1-2mm off the bed surface!
This is the skirt after setting the z end stop using paper
Blobs of material on the top of the print
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion