Results 1 to 10 of 166
Thread: New 12" user and I am LOST!
Threaded View
-
02-05-2015, 09:26 AM #2
Hi tsteever, Welcome. You came to the right place, I am sure there are folks who can help. NOT sure how many use macs, and the folks using Rumba are not many but I think it will get figured out for you. I have ramps and linux so not much help, but for one thing the paper thickness is the way to go for leveling. I use the home or z home in pronterface, and have not really used the LCD for that, you could see if that gives you anything different. As for your part, I have no idea what an afinia looks like, I will look it up, but I am sure it took tuning to get to the way it is printing now. I am confident we will help you figure this out, and you will get TONS of support here. These guys rock!
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion