Results 1 to 3 of 3
Thread: Holes in ABS print
Threaded View
-
02-04-2015, 01:04 PM #2
- Join Date
- Feb 2015
- Posts
- 13
I'm no expert myself, but even the best of those looks a little stringy. It seems like an extrusion rate or z-calibration issue; either way the printer needs to smoosh each layer down onto the one below it a little. I don't use Cura, but it would be helpful to know more about your hardware.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion