Results 1 to 6 of 6
Threaded View
-
02-03-2015, 02:36 PM #5
- Join Date
- Apr 2014
- Posts
- 228
OK, that's interesting. Their changelog and quick start guides don't explain where that setting is though, and don't even say what they call the setting. It's odd that the PR & changelog use different terminology than the software does.
It's in Other->Dimensional Adjustments. "Horizontal Size Compensation".
Ideally, you keep that in mind in part design phase, and make sure your extrusions are well-adjusted, but there are so many non-ideal models out there.
It's nice to have, hopefully the improved path planning helps too.Last edited by JRDM; 02-04-2015 at 09:47 AM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help