Results 1 to 10 of 12
Threaded View
-
02-01-2015, 04:26 PM #6
A couple have ordered raw stock from Grainger based on the discussion here - http://3dprintboard.com/showthread.php?3461-MakerFarm-8-quot-i3v-Prusa-build-by-Printbus&p=44079&viewfull=1#post44079
AbuMaia points out later in that thread that one could try just flipping the rod(s) end-on-end as a temporary fix.
On the "squeaking", do you have the spiral-cut shaft couplers? They can tend to ring, making it sound like the Z-rod is squeaking. I added two turns of clear packaging tape around the couplers to dampen the spiral so they don't ring.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion