Results 1 to 10 of 36
Thread: Better slicer?
Threaded View
-
01-30-2015, 10:15 AM #12
It's easy to duplicate a part. It asks "how many" you click and it places them and arranges them. You can also easily scale, rotate and move the part or individual parts. If you move a part just a tiny bit below the grid, that portion gets removed and only what's above the grid gets sliced, so, you have a flat bottom.
Check this out. You can print parts inside and under other parts. I've never seen any other slicer do this.
https://www.youtube.com/watch?v=lHqR...ature=youtu.beBambu P1S/AMS
NVision4D http://nvision4d.com
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion