Results 1 to 10 of 14
Thread: Printing issue help
Threaded View
-
01-29-2015, 02:53 PM #3
- Join Date
- Nov 2014
- Posts
- 522
so whats going wrong? the small ABS bits popping off the bed? If that's the case print with a brim, it's because of shrinkage and the brim will help hold things in place/keep them from warping as bad so that you can get them printed and get ABL enabled, once you get that going things get much easier
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help